90 °C
60 °C
40 °C
Page 90 / 96
12.4. SANARIUM B - Decalcifying the evaporator
open close
3
1
3
2
2
SANARIUM B - Rinsing
8. Close the drain valve (2).
9. Fill the evaporator's filling unit (3)
with water.
10. Place the filler can (1) under the
drain. Open the drain valve (2).
11. Close the drain valve (2) again
after draining the evaporator.
12. Repeat the rinsing procedure two
or three times.
Resetting error 92 on the control panel
D The final drying phase must have
finished.
13. Carry out decalcification.
To Next Page
Loading...
