KMC Controls BAC-4000 series User Manual

Procedure Steps Display
19 Set the display
blanking.
Choose DISPLAY from the ADVANCED menu to
set the display appearance after the last button is
pushed.
BLANKING—Choose one of the blanking
options.
l CLOCK—An analog clock replaces the
temperature and mode icons.
l BACKLIGHT OFF—The display
brightness changes to the level set by
DIM LEVEL after the last button
interaction.
l NONE—The temperature and mode icons
always remain visible.
DIM LEVEL—Sets the level of brightness of
the display back light if BACKLIGHT OFF is
the selected blanking option.
DISPLAY
BLANKING
DIM LEVEL
BackEnterExit
BLANKING
ANALOG CLOCK
BACKLIGHT OFF
NONE
DelEnterCncl
DIM LEVEL:
50%
DelEnterCncl
20 User lockout
buttons.
Choose KEY LOCKOUT from the ADVANCED
menu to limit accessibility to users with
Password 1, the user password.
MODE/SETPOINT—Users with Password 1
cannot change any value or mode.
MODE—Users with Password 1 cannot
change the heating/cooling, fan, or occupancy
modes.
NONE—Users with Password 1 have full
access to active setpoints, heating/cooling, fan,
and occupancy modes.
KEY LOCKOUT:
MODE/SETPOINT
MODE
NONE
DelEnterCncl
Choosing advance options (continued)
Installation, Operation, and Application Guide for AppStat Section 4: Commissioning functions
Revision G 63

KMC Controls BAC-4000 series Specifications

General

Brand	KMC Controls
Model	BAC-4000 series
Category	Controller
Language	English