KMC Controls BAC-4000 series User Manual

Procedure Steps Display
17 Enter or change
passwords.
Choose PASSWORDS from the ADVANCED
menu to set either Password 1 or Password 2.
Password 1 is for a facility user and limits
changes to active setpoints, fan operation,
occupancy, and heating and cooling modes.
Password 2 is for a controls technician to set
up and commission the AppStat.
Note: Entering four zeros (0000) removes the
password. The AppStat is supplied without
passwords.
1.
From the PASSWORD1 or PASSWORD2 menu
press either the or buttons to change the
first digit of the password.
2.
Press the Enter button to select the next digit.
Repeat for all four digits.
3.
When the Enter button is pressed for the last
digit, the new password is saved and the
display advances.
PASSWORDS
PASSWORD1
PASSWORD2
BackEnterExit
PASSWORD1:
0 0 0 0
DelEnterCncl
18 Calibrate the
inputs.
Choose CALIBRATION from the ADVANCED
menu to calibrated an input. The AppStat
includes two calibration entries; one for the
internal temperature sensor and one for the
optional remote temperature sensor connected to
the RS terminal.
Enter a calibration factor to adjust either input
for sensor inaccuracies.
For a low input reading enter a positive
correction value.
For a high input reading enter a negative
correction value.
CALIBRATION
CAL INTERNAL
CAL EXTERNAL
BackEnterExit
CAL INTERNAL:
0.0
BackEnterCncl
Choosing advance options (continued)
Section 4: Commissioning functions KMC Controls, Inc.
62 Revision G

KMC Controls BAC-4000 series Specifications

General

Brand	KMC Controls
Model	BAC-4000 series
Category	Controller
Language	English