36
Place the knife (7-4/1) on the holder of the copy
clamping plate and rotate the grinder (7-4/2) on
the knife.
This can result in serious cut injuries.
Wear protective gloves.
CAUTION
ATTENTION
Before clamping the knife, check whether the
copy clamping plate matches the knife (com-
pare labeling of the copy clamping plate with
labeling of the knife). Use of a copy clamping
plate that does not match the knife can lead
to damage to the knife and the copy clamp-
ing plate.
NOTICE
There is a matching copy clamping plate for
each cutter knife type. To prepare the match-
ing grinding plate, KNECHT Maschinenbau
GmbH needs a knife drawing or a new knife.
If possible, specify the cutter type, knife
radius and knife type.
7. Operation
Figure 7-4 Clamping the knife
2
1
To Next Page
Loading...