5
4. Transport 27
4.1 Transport Aids 27
4.2 Transport damage 27
4.3 Transport to another installation site 27
5. Installation 29
5.1 Selection of qualified personnel 29
5.2 Installation site 29
5.3 Supply connections 29
5.4 Settings 29
5.5 Initial commissioning of the grinding machine 30
6. Commissioning 31
7. Operation 33
7.1 General principles of grinding technology 33
7.2 Changing the profile 34
7.3 Grinding the cutter knives 35
7.3.1 Switching on the grinding machine 35
7.3.2 Mounting the copy clamping plate 35
7.3.3 Adjusting the grinding angle 37
7.3.4 Aligning the grinding unit 37
7.3.5 Aligning the left polishing unit 39
7.3.6 Aligning the right polishing unit 40
7.3.7 Starting the grinding process 40
7.4 Changing the copy clamping plate 41
7.5 Changing the wet grinding belt 43
7.6 Changing the right flap brush 44
7.7 Changing the left flap brushes 45
7.8 Changing the polishing pastes 46
8. Control system 47
8.1 Main Screen 47
8.2 Activating the product file 48
8.3 Renaming, creating and deleting the product file 49
8.3.1 Renaming product file 49
8.3.2 Creating the product file 50
8.3.3 Deleting the product file 50
Table of Contents
To Next Page
Loading...