User manual - DATA RECORDER and cooperating software
Parameter Description Value
Description
page
Source: channel 7 Channel 7 alarm state source 57
Source: channel 8 Channel 8 alarm state source 57
Close delay Close switch delay time 58
Open delay Open switch delay time 58
Closed hold time Time for holding the closed state 58
Open hold time Time for holding the open state 58
Parameters in the “RS485 port settings” menu
Address Device address 59
Baud rate Baud rate 59
Resp. delay Delay of device response 59
Conf. change
Permission for modifying unit’s parameters
through RS-485 interface
60
Parameters in the “USB options” menu
Automatic write of
registered data
Permission for auto data write 61
Language User interface language 62
To Next Page
Loading...