10 S008769 Rev A
Ngenuity Operator Manual
14 Extender, Exit
Tray
The exit tray extender is adjustable for length and acts as support for
document(s) exiting the scanner’s transport that exceed the standard exit
tray length
d
. Pull the extender out towards the front of the scanner for
longer documents.
A second document stop guide is located on the end of the exit tray
extender. It performs the same function as the exit tray’s document stop
guide noted above (see #13
in this table). Since the exit tray’s document
stop guide’s does not extend out along with the exit tray extender, the
second document stop guide is needed to stop the forward motion of extra
long documents leaving the scanner’s transport. It is to be placed in an ‘up’
position for use and folded down when not.
a. Does not apply if the scanner’s Straight Pass-Through feature is being used.
b. See footnote ‘a’ above
c. See footnote ‘a’ above
d. See footnote ‘a’ above
Ref# Item Name Description
Exit tray extender’s
document stop guide
Exit tray’s document
stop guide (down position)
Exit Tray - Extender Pulled Out
(up position)
To Next Page
Loading...
