SECTION 3 - PARTS, ASSEMBLIES & HARDWARE
1-3-6
3-6
© 2018 Konami Gaming Inc. P/N 810352
CONCERTO CRESCENT
(Original Instructions)
BACKPLANE BOARD
reMoval
1� Remove MPU Board�
2� Disconnect harnesses from Backplane Board�
3� Remove nine #6-32 screws from Backplane Board�
4� Remove Backplane Board�
installation
1� Place Backplane Board in position and install nine #6-32
screws into Backplane Board�
2� Connect harnesses�
3� Install MPU Board�
SPEAKERS
reMoval
1� Open the Main Deck Door and remove the nuts securing
speakers to Deck Door�
2� Remove mounting Connectors and Speakers�
installation
1� Install Connectors on Speakers and place Speakers onto
mounting bracket�
2� Secure with screws�
NOTE: Each #6-32 screw secures a grounded
connection between the backplane board and the
game. All screws are required for proper operation.
BILL VALIDATOR
reMoval
1� Unlock and open both Deck Door and Sub Door�
2� Turn off machine power�
3� Unlock and open Bill Cassette Door�
4� Remove Bill Cassette Box�
5� Remove the two M4 X 6 screws on the left side of the
Enclosure�
6� Remove the four M3 X 6 screws on the back of the Bill
Validator Frame�
7� Remove Bill Validator�
installation
1� Install Bill Validator�
2� Secure with the four M3 X 6 screws on the back of the
Bill Validator frame�
3� Secure the two M4 X 6 screws on the left side of the
Enclosure�
4� Install bill Cassette Box�
5� Close and lock Bill Cassette Door�
6� Turn on machine power�
7� Close and lock both Deck Door and Sub Door�
To Next Page
Loading...
