10. SERVICE MODE
308
Field Service Ver.2.0 Mar. 2009
bizhub 501/421/361
10.16.3 CE Password
10.16.4 Administrator Password
Functions • To set and change the CE password.
Use • Use to change the CE password.
Setting/
Procedure
• Enter the CE password (8 digits) on the on-screen keyboard.
• The initial setting is “92729272.”
Current Password: Enter the currently using CE password.
New Password: Enter the new CE password.
Re-Input Password: Enter the new CE password again.
NOTE
• When the following setting leads to the Password Rules [ON], the password
with the same letters as well as the password which is same as the previous
one cannot be changed.
[Administrator Settings] → [Security Settings]
• NEVER forget the CE password. When forgetting the CE password, call
responsible person of KMBT.
Functions • To set and change the administrator password.
Use • Use to change the administrator password.
• Use this function when the administrator forget the administrator password
because a new password can be set without entering the current administrator
password with this.
Setting /
Procedure
• Enter the administrator password (8 digits) on the on-screen keyboard.
• The initial setting is “12345678.”
New Password: Enter the new administrator password.
Re-Input Password: Enter the new administrator password again.
NOTE
• When the following setting leads to the Password Rules [ON], the password
with the same letters, the password which is same as the previous one and
the password of less than eight digits cannot be changed.
[Administrator Settings] → [Security Settings]
To Next Page
Loading...
Need help?
General
