3. Service Mode
6
Field Service Ver.1.0 Mar. 2009
LK-101/102/103
3.3 Settings in the License management
3.3.1 Activation
3.3.2 Deactivation
3.3.3 Repair
3.3.4 Initialize
Functions • To activate i-Option functions.
Use • To activate i-Option functions with CE.
• The functions can be activated by selecting the desired function and enter the appropriate
license code.
• Administrators also can activate i-Option functions through Administrator Settings.
Setting/
Procedure
See P.8
Functions • To deactivate i-Option functions.
Use • To deactivate i-Option functions due to registration error, expiration of lease term, change
to other MFP or etc.
• The functions can be deactivated by selecting the desired function and enter the appropri-
ate deactivation code.
Setting/
Procedure
See P.12
Functions • To repair license management information.
Use • To be used when license management information is lost due to replacement of NVRAM
board or CF card or any other trouble.
• License management information can be repaired by acquiring repair code with repair
request code, and entering the repair code.
Setting/
Procedure
See P.17
Functions • To initialize license management information.
Use • To be used when license management information cannot be repaired.
• License management information should be initialized when the machine fails to generate
request code or repair request code due to any trouble and the information cannot be
repaired.
Setting/
Procedure
See P.20
To Next Page
Loading...
Need help?
General
