Field Service Ver.1.0 May. 2008 1. PRODUCT SPECIFICATIONS
1
SD-507
îš„ OUTLINE
1. PRODUCT SPECIFICATIONS
A. Type
B. Paper type
*1: Only supported in Taiwan.
*2: Supported in other than inch area and Taiwan.
C. Maintenance
D. Machine specifications
E. Operating environment
NOTE
• The information herein may be subject to change for improvement without notice.
Type FS built-in saddle-stitching device
Installation Screwed to the FS
Document Alignment Center
Stapling Function
Center parallel two points
No. of sheets to be stapled together: 2 to 15
Consumables Staples (2000 staples/cartridge)
Type
Plain Paper,
Recycled paper
56 to 90 g/m
2
Size
Metric:
A3, B4, A4S, B5S *2, 11 x 17, 8
1
/
2
x 11S, Foolscap,
8K
*
1, 16KS
*
1
Inch: 11 x 17, 8
1
/2 x 14, 8
1
/2 x 11S, A3, A4S, Foolscap
Capacity 200 sheets or 20 copies
Maintenance Same as the main body.
Power Requirements 24/5V DC (supplied from FS)
Power Consumption 9.5 W or less
Dimensions 445 (W) x 478 (D) x 203 mm (H)
Weight Approx. 9.3 kg
Temperature Same as the main body.
Humidity Same as the main body.
To Next Page
Loading...
Need help?
General
