bizhub 501/421/361
10. SERVICE MODE
317
Field Service Ver.2.0 Mar. 2009
1
10.17.3 Counter Setting
Functions • To set the counting method for the total counter and size counter.
• To set the size regarded as the large size (2 counts.)
Use • Use to change the counting method for the counters.
Setting/
Procedure
Tot al Co un te r
• Default setting is”Mode1”.
Mode1:1 count per 1 copy cycle (Default: Others4, Japan)
Mode2: Large size is double counts (Default: US, Europe, Others1, Others2, Others3)
NOTE
• The content of this setting is reflected in the count method with the key
counter.
Size Counter
• A3/11 x 17 :When it exceeds 279 mm in the main scan
direction and 420 mm in the sub scan direc-
tion (exceeds 399 mm at fax scan), it is
regarded as the large size.
• A3/B4/11 x 17/8
1
/2 x 14 :When it exceeds 215 mm in the main scan
direction and 355 mm in the sub scan direc-
tion (exceeds 337 mm at fax scan), it is
regarded as the large size.
• A3/11 x 17/B4/8
1
/2 x 14/Foolscap :When it exceeds 203 mm in the main scan
direction and 330 mm in the sub scan direc-
tion (exceeds 313 mm at fax scan), it is
regarded as the large size (However the size in
the main scan direction changes according to
the foolscap size setting.)
• Not counted (Default: Others 4, Japan)
• A3 and 11 x 17 (Default: US)
• A3, B4, 11 x 17, and 8
1
/
2
x 14 (Default: Europe, Others 1, Others 2, Others 3)
• A3, B4, Foolscap, 11 x 17, 11 x 14, and 8
1
/
2
x 14
*Count-up List
0: No count; 1: 1 count; 2: 2 counts; 3: 3 counts; 4: 4 counts
Copying 1-sided copy 2-sided copy
Size
Sizes other than
those specified
Specified sizes Sizes other than
those specified
Specified sizes
Mode
Mode Mode Mode Mode
12121212
Total 11122224
Size 00110022
2-sided total 00001111
To Next Page
Loading...
Need help?
General
