Konica Minolta bizhub 361 Service Manual

FS-523/RU-507
3. MECHANICAL ADJUSTMENT
33
Field Service Ver.1.0 May. 2008
3.6 Adjusting the tray overload detection level
This adjustment is made when replacing the FS control board (FSCB) or replacing the tray lift motor (M7).
A. Procedure
1. Set the output check mode "Main tray operation
mode."
(See P.17)
2. Rotate VR2 [1] on the FS control board (FSCB)
counterclockwise up to the limit.
4521f3c014na
[1]

Konica Minolta bizhub 361 Specifications

General

Brand	Konica Minolta
Model	bizhub 361
Category	All in One Printer
Language	English