Konica Minolta bizhub 361 Service Manual

Field Service Ver.1.0 May. 2008 3. OTHER
7
SD-507
3.3.4 Saddle Unit
1. Remove the screw [1], and remove the
Connector Cover [2].
2. Remove the screw [3], and remove the
two Ground Terminals [4].
3. Unplug two connectors [5].
4. Remove the screw [6], and remove the
Front Cover /Lw [7].
5. Pull the Lock Release Lever [8], and
open the Saddle Unit.
6. Remove the screw [9], and close the
Saddle Unit.
[1]
[2]
4511f2c007na
[4]
[5]
[3]
4511f2c008nb
[7]
[6]
4511f2c009na
[8]
[9]
4511f2c010nb

Konica Minolta bizhub 361 Specifications

General

Brand	Konica Minolta
Model	bizhub 361
Category	All in One Printer
Language	English