Konica Minolta bizhub 361 Service Manual

Field Service Ver.1.0 May. 2008 3. OTHER
13
PC-407
3.3.4 Wire
1. Remove the Tray.
(See P.12)
2. Remove four screws [1] and remove the
Front Cover Assy [2].
3. Unplug the connector [3].
4. Remove two screws [4] and the Inner
Cover Assy [5].
NOTE
• Do not peel off pulley protective mylar
sheet.
5. Remove two screws [6] and remove the
Driver Cover [7].
6. Remove three screws [8] and remove
the Driver Mounting Plate Assy [9].
[1]
[3]
[2]
[1]
4061f2c224na
[4]
[4]
[5]
4061f2c225na
4061f2c226na
[6]
[7]
[9]
[8]
4061f2c227na

Konica Minolta bizhub 361 Specifications

General

Brand	Konica Minolta
Model	bizhub 361
Category	All in One Printer
Language	English