4 Connection
© Copyright Reserved KONICS Co., Ltd. 31
Depending on input specification, set the jumper pin of universal input card (KRN-UI2) channel 1,
channel 2 as below figure.
Jumper pin Input specification Input break alarm
① 0 to 20 ㎃, 4 to 20 ㎃ Enables only 4 to 20 ㎃
②
TC, RTD, ±60mV, ±200mV
Enables
③ ±2V, 1 to 5V, ±5V, -1 to 10V
Disables
To Next Page