8 Parameter detail setup
64 © Copyright Reserved KONICS Co., Ltd.
Set Low Scale (Lower limit scale value) = -20.0, High Scale (Upper limit scale value) = 20.0.
(1) Low Scale(Lower limit scale value)
Set scale value for lower limit input value (Low Range).
Set range: -99999 to 99999 ↔ -9999.9 to 9999.9 ↔ -999.99 to 999.99 ↔ -99.999 to
99.999 ↔ -9.9999 to 9.9999 (Depending on Scale Point setting, the range is different.)
Factory default: -
(2) High Scale(Upper limit scale value)
Set scale value for upper limit input value (High Range).
Set range: -99999 to 99999 ↔ -9999.9 to 9999.9 ↔ -999.99 to 999.99 ↔ -99.999 to
99.999 ↔ -9.9999 to 9.9999 (Depending on Scale Point setting, the range is different.)
Factory default: -
To Next Page
Loading...