Kontron CP308 - Front Panel of the 8 HP CP308 with CP308-MEDIA Module

CP308 CP308-MEDIA
ID 1027-4487, Rev. 3.0 Page B - 7
P R E L I M I N A R Y
B.4 Front Panel of the 8HP CP308 with CP308-MEDIA Module
Figure B-2: Front Panel of the 8HP CP308 with CP308-MEDIA Module
CP308
Watchdog and Overtemperature Status LEDs:
WD (green): Watchdog Status
TH (green): Overtemperature
Status
System Management LED:
SMC LED (red/green/red+green):System Management
Controller Status
General Purpose LEDs:
LED 0..3 (red/green/red+green): General
Purpose/POST Code
Integral Ethernet LEDs:
ACT (green): Ethernet Link/Activity
SPEED (green/orange): Ethernet Speed
SPEED ON (orange): 1000 Mbit
SPEED ON (green): 100 Mbit
SPEED OFF: 10 Mbit
Note ...
If the General Purpose LEDs LED 0..3
are lit red during boot-up, a failure is
indicated before the uEFI BIOS has
started.
For further information, please contact
Kontron.