EasyManua.ls Logo

Kontron CP308 - Mobile Intel GS45 Express Chipset Overview

Kontron CP308
170 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Functional Description CP308
Page 2 - 6 ID 1027-4487, Rev. 3.0
P R E L I M I N A R Y
2.1.3 Mobile Intel® GS45 Express Chipset Overview
The Mobile Intel® GS45 Express Chipset consists of the following devices:
Intel® GS45 Graphics Memory Controller Hub (Intel® GS45 GMCH)
Intel® 82801IUX I/O Controller Hub (ICH9M-SFF)
The Mobile Intel® GS45 Express Chipset provides the processor interface for the Inte
Core™2 Duo microprocessors, two DDR3 channels, and a high-performance graphics accel-
erator. The ICH9M-SFF is a centralized controller for the boards’ I/O peripherals, such as the
PCI, PCI Express, USB 2.0, SATA II, SPI and LPC ports.
2.1.3.1 Intel® GS45 Graphics Memory Controller Hub
The Intel® GS45 GMCH is a highly integrated hub that provides the CPU interface (optimized
for the Intel® Core™2 Duo microprocessor), two DDR3 SDRAM system memory interfaces at
800 MHz or 1066 MHz, a x4 DMI interface as well as a C-Link interface to the ICH9M-SFF and
either two high-performance internal graphics engines or one PCI Express x16 port for an ex-
ternal graphics chip. Additionally, the GS45 GMCH provides an Integrated Trusted Platform
Module (iTPM) for enhanced security.
2.1.3.2 I/O Controller Hub ICH9M-SFF
The ICH9M-SFF is a highly integrated multifunctional I/O Controller Hub that provides the in-
terface to the PCI bus and integrates many of the functions needed in today's PC platforms, for
example, PCI Express, SATA controller, USB host controller supporting USB 2.0, LPC inter-
face, and an SPI Flash BIOS interface controller. The ICH9M-SFF communicates with the host
controller over a dedicated DMI interface and a dedicated C-Link interface.
The I/O Controller Hub feature set comprises:
PCI 2.3 interface with eight PCI IRQ inputs
Eight USB controllers with up to twelve USB 1.1 or USB 2.0 ports (up to eight ports are
used on the CP308)
Controller link interface to the GS45 GMCH
DMI interface to the GS45 GMCH
Two SATA I/II host controllers with four SATA ports and RAID 0/1 support
Six PCI Express ports, two for GbE and either 4 x1 PCIe or 1 x4 PCIe for I/O expansion
HDA controller
SPI interface
LPC interface
RTC controller

Table of Contents

Related product manuals