Korg MPS-10 - Exporting SAMPLE Files

MPS-10 - Parameter guide
81
After selecting “Category”, the screen looks like this.
Move the cursor to “Execute” and press the ENTER button. This imports the readable SAMPLE data
files within the folder as new SAMPLEs.
Note: Cancel the operation while in progress if you want to stop importing. Note that the SAMPLEs that were
imported up to that point remain in internal memory.
Note: When creating a new SAMPLE, the SAMPLE name is used for the filename. Use only alphanumeric charac-
ters for the filename. (Japanese filenames cannot be used.)
How to export SAMPLEs
Here’s how to export the SAMPLE data saved in this unit to a USB flash drive.
1 Turn the METRONOME knob to switch from the “Import” page to the “Export” page.
2 Move the cursor to “SAMPLE” and press the ENTER button. A page listing the SAMPLEs in this
unit is shown.
Note: You can press the EDIT button to change the category.
3 When you confirm a SAMPLE by pressing the ENTER button, the “Category” and “Name” are
shown for the selected SAMPLE data.
4 Next, specify the filename of the SAMPLE to export.
Move the cursor to “Name” and press the ENTER button to show the rename page. ( p. 24, “Using
the Name dialog box (how to change the name)”)