Kostal PLENTICORE plus - Page 73

73
3
© 2018 KOSTAL Solar Electric GmbH
Installation
18. Select the corresponding menu item with the arrow
keys.
19. Press “ENTER” and select the solar portal used.
Confirm the entries with “ENTER”.
20. To activate the transfer, highlight the item and confirm
with the “ENTER” key.
P
The transfer is activated
21. Press the right arrow key to go to the next installation
item.
P
The "Extra option" menu appears on the display.
This item can be used to release options by entering
an activation code in the inverter. The activation code
for connecting a battery to the DC input 3 on the
inverter, for example, can be purchased from our
online shop.
Select the “Release option” and confirm the input
with the “ENTER” key.
Enter the code you obtained previously in the
KOSTAL Solar online shop.
At the end, confirm the input with √.
22. Press the right arrow key to go to the next installation
item.
P
The “Battery type” menu is displayed.
If there is a battery connected to the inverter, the
battery type connected can be selected here. Use
the arrow keys to select the battery type. Confirm the
entries with “ENTER”.
INFO
The extra options currently released
are shown under “Released options”.
INFO
You will find a list of approved battery
storage systems in the download area
for the product on our homepage at
www.kostal-solar-electric.com
2
3
4
5
6
7
8
9
10
11
12
13
1