3-66 BA 348-01 * 2.0 * 34801b340.fm
3 Operation
Control lever for 3rd control circuit in continuous operation
Continuous operation of the 3rd control circuit is beneficial when using attachments
with additional hydraulic functions, or when operating hydraulic motors
(a rotary broom, for example) or attachments with separate control valves.
Continuous operation is performed with the control lever of the 3rd control circuit.
In order to avoid damage, for example oil overheating due to the overpressure
control in the oil circuit, perform continuous operation of the 3rd control circuit
only with an attachment installed and connected with hydraulic hoses!
☞Pull and hold control lever 12 fully backward Z
☞Move lock sleeve A in control lever 12 (3rd control circuit) downward to disengage it out
of the groove and press it into the detent (arrow )
➥Continuous operation of the 3rd control circuit is switched on
Fig. 89 : Continuous operation of 3rd control circuit
A
12
Z
To Next Page
Loading...
