BA 348-01 * 2.0 * 34801b340.fm 3-73
Operation 3
3.49 Equipping the machine with a standard bucket
Field of application and use of bucket
The standard bucket is mainly used for digging earth, and for loosening, picking up,
transporting and loading loose or solid materials.
In addition, bear in mind the mandatory regulations relevant to accident prevention.
The bucket is not certified for applications with lifting gear!
Hitching hooks, eyelets or other lifting gear onto the bucket is prohibited as well!
Machine travel on public roads with a full bucket is prohibited according to StVZO
(German road traffic regulations).
Use on public roads –seePreparatory work – putting the machine into operation on
page 3-39
Checking the mounting bore of the attachment
In order to avoid risk of accidents and damage on the quickhitch, check
mounting bore L of the attachment regularly for damage!
• Lock pin E is not aligned with mounting bore L of the attachment.
➥Have limit stop M of the attachment replaced by an authorized service centre if it is worn
• Bent lock pin E
➥Have the lock pin replaced by an authorized service centre
Fig. 97 : Mounting bore of attachment
E
L M
To Next Page
Loading...
