EasyManua.ls Logo

Kramer 348

Kramer 348
238 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BA 348-01 * 2.0 * Sicherheit_Radlader.fm 2-5
Safety instructions 2
Selection and qualification of personnel, basic responsibilities
Any work on or with the machine must be performed by reliable personnel only.
Do not let unauthorized persons drive or work with the machine! Observe statutory
minimum age limits!
Employ only trained or instructed personnel on the machine, and clearly and unequivocally
define the individual responsibilities of the personnel for operation, set-up, maintenance and
repair!
Define the machine operator’s responsibilities – also with regard to observing traffic
regulations. Give the operator the authority to refuse instructions by third parties that
are contrary to safety!
Do not allow persons to be trained or instructed or persons taking part in a general
training course to work on or with the machine without being permanently supervised
by an experienced person!
Work on the electrical system and equipment, on the chassis and the steering and
braking systems must only be performed by technical personnel that has been specially
trained for such work.
Work on the hydraulic system of the machine must be performed only by personnel
with special knowledge and experience in hydraulic systems!
Seal off the danger zone should it not be possible to keep a safe distance.
Stop machine operation if persons do not leave the danger zone in spite of warning!
Keep out of the danger zone!
Danger zone:
The danger zone is the area in which persons are in danger due to the movements of the
machine
work equipment
other equipment or load!
This also includes the area affected by falling material, equipment or by parts that are
thrown out.
The danger zone must be extended accordingly in the immediate vicinity of buildings,
scaffolds or other elements of construction!

Table of Contents

Related product manuals