5-6 BA 348-01 * 2.0 * 34801b510.fm
5 Maintenance
Adding engine oil
Too much or incorrect engine oil can result in engine damage!
☞Do not add engine oil above the MAX mark of the oil dipstick
☞Use only the specified engine oil –seeFluids and lubricants on page 5-39
Use a suitable container to collect the engine oil as it drains and dispose of it in
an environmentally friendly manner!
☞Proceed as follows:
• Clean the area around oil filler cap D with a lint-free cloth
• Open filler cap D
• Add engine oil
• Wait a moment until all the oil has run into the oil sump
• Check the oil level –seeChecking the engine oil level on page 5-5
• Add oil if necessary and check the oil level again
• Close filler cap D
• Push oil dipstick C back in as far as possible
• Completely remove all oil spills from the engine
Fig. 166 : Oil dipstick and oil filler cap
C
D
OIL
To Next Page
Loading...
