1-12 BA 348-01 * 2.0 * 34801b110.fm
1 Introduction
1.6 Fields of application and using the wheel loader with an attachment
General notice on using the wheel loader
The attachments will decide in the first place how the machine is used.
Refer to the National Type Approval (Germany), the Data Confirmation (Germany) or the
following table for fitting certified attachments and for the specific requirements
–see“Certified attachments” on page 1-13!
When fitting attachments that are not listed in the National Type Approval (Germany),
the Data Confirmation (Germany) or the registration documents, get in touch with your
dealer for authorization (warranty claims)! In addition, a Separate Certification for Vehicles
(Germany) made out by the appropriate national authorities is required!
The wheel loader is not certified for forestry, spraying or lifting gear
applications!
Using the machine in forestry can expose the operator and other persons to
the following dangers:
– Danger of falling objects
– Falling tree trunks
– Penetration of objects into the cabin.
Get informed on and follow the legal regulations of your country.
Fitting attachments onto the machine
This Operator’s Manual only describes how to install and use the standard bucket, multipurpose
bucket and pallet forks.
–see“Equipping the machine with a standard bucket” on page 3-73
–see“Installing a multipurpose bucket and hydraulic attachments” on page 3-84
–see“Fitting pallet forks” on page 3-96
Refer to the Operator’s Manuals of the attachments for further information on installing and
using other attachments.
To Next Page
Loading...
