3-20 BA 348-01 * 2.0 * 34801b330.fm
3 Operation
3.12 Operator seat with air suspension
Important information
Correct seat operation and adjustment increases drive comfort and avoids back problems.
Therefore, adjust the seat to the operator’s weight before putting the machine into operation
and when changing operators!
• In order to avoid injury, do not store any objects in the suspension travel range of the
operator seat
• Do not modify the operator seat (for example by retrofitting spare parts other than
original. Functions that are important for safety can be affected. In case of personal
injury or damage to property, warranty and liability claims are excluded
• If the seat functions do not work as usual (seat suspension, for example), contact an
authorized service centre immediately for repair
Weight adjustment (air suspension)
In order to avoid damage to the compressor, do not make the compressor run
more than 1 minute as you adjust the weight!
Sit down on the operator seat and adjust it to the specific weight by pulling or pressing the
weight adjustment lever.
☞Adjust as follows:
• Pull handle A up – high weight
• Press handle A down – low weight
➥ The operator seat is adjusted to the correct weight if the arrow is in the medium
range of the window
➥ Within this visible range, the individual height can be adjusted up to the minimum
suspension travel
➥ The minimum or maximum weight adjustment is indicated with the audible upper
and lower limits
Fig. 45 : Weight adjustment
A
To Next Page
Loading...
