Kramer 348

6-6 BA 348-01 * 2.0 * 34801b610.fm
6 Technical data
Lift and tilt ram speed
Usable consumer pressure at 3rd control circuit
Usable consumer pressure at additional control circuit (option)
Notice!
The specified flow rates are available at the front or rear quick couplers.
Description of quick coupler connections – see chapter 3 “Additional front/rear
control circuit (option)” on page 3-108
Wheel loader model 348-01
Hydraulic pump 8 cm
3
/rev  20 l/min at 2600 rpm
Lift ram
Raise 6.0 sec
Lower 4.3 sec
Tilt ram
Tilt in 2.4 sec
Tilt out 1.5 sec
Wheel loader model 348-01
Hydraulic pump Function Rpm / l/min / bar
Front 3rd control circuit quick
couplers
3rd control circuit control
valve
2600/21/175
Wheel loader model 348-01
Tandem hydraulic pump
8 + 8 cm/rev
Function Rpm/litres/bar
Additional rear control circuit
(rear)
Electric control (solenoid valve)
via 3rd control circuit
2600/40/150
Front additional control circuit
(on right of loader unit)
Tandem hydraulic pump
16 + 8 cm/rev
Function Rpm/litres/bar
Additional rear control circuit
(rear)
Electrically operated solenoid
valve with additional operation
of 3rd control circuit lever
(continuous operation)
2600/40/150
Front additional control circuit
(on right of loader unit with
external return)
2600/55/65
2600/50/110