BA 348-01 * 2.0 * 34801b510.fm 5-33
Maintenance 5
Cleaning the door locks and arresters
☞Keep the door locks, arresters and hinges clean
☞Apply spray oil to the hinges and joints if necessary
Cleaning the seat belt
Risk of injury! Dirty belts, in particular automatic seat belts, hinder winding and
jeopardize the operator’s safety!
☞Clean dirty belt straps and wind them only when they are dry!
☞Have an authorized service centre replace a malfunctioning seat belt by a
new one
The following auxiliary means are recommended for cleaning:
• Mild soap solution. Clean the seat belt without removing it
• Do not use any chemical agents – the material can be destroyed!
Cleaning the exterior of the machine
In order to avoid corrosion on the machine (paint finish, joints, threaded
fittings, etc.), thoroughly clean the machine with water after driving on saline
ground or roads and after driving the machine to a different site!
The following auxiliary means are recommended for cleaning:
• High-pressure cleaner or bristle brush with water and mild soap solution
A machine with anticorrosion protection (“aggressive media”) must be cleaned
separately – see chapter 5 “Maintenance “Aggressive Media” (option)” on
page 5-36!
To Next Page
Loading...
