2-4 BA 348-01 * 2.0 * Sicherheit_Radlader.fm
2 Safety instructions
• Never make any modifications, additions or conversions to the machine and its
superstructures (for example cabin, loader unit, etc.), as well as to the attachments,
which might affect safety without the approval of the manufacturer! This also applies to
the installation and the adjustment of safety devices and valves, as well as to welding
work on load-bearing elements!
• Spare parts must comply with the technical requirements specified by the manufacturer.
Original spare parts can be relied to do so!
• Replace hydraulic hoses within stipulated and appropriate intervals even if no safety-
relevant defects can been detected!
• Before working on or with the machine, remove jewellery, such as rings, wristwatches,
bracelets, etc., and tie back long hair and do not wear loose-fitting garments, such as
unbuttoned or unzipped jackets, ties or scarves.
Injury can result from being caught up in the machinery or from rings catching on
moving parts!
• Keep the machine clean. This reduces
• Fire hazard, for example due to oil-soaked rags lying around
• Risk of injury, for example due to dirt or debris on the footholds, and
• Risk of accidents for example due to dirt or debris on the brake or accelerator pedal!
• Observe all safety, warning and information signs and labels on the machine!
• Adhere to prescribed intervals or those specified in the Operator’s Manual for routine
checks/inspections and maintenance!
• Tools and workshop equipment adapted to the task on hand are absolutely indispensable
for performing service, inspection, maintenance or repair work!
To Next Page
Loading...
