Safety 2
Safety labels on the machine 2.5
Original Operating Instructions 150000802_00_en 27
1. Order no. 942 459 0 (2x)
Danger due to crushing or shearing
Risk of injury due to crushing or shearing
points on moving machine parts.
While parts are moving, never reach into
areas where there is a risk of being
crushed.
2. Order no. 939 576 0 (2x)
a)
Danger from rotating machine parts
There is a risk of injury as machine parts may
still continue to run for a certain time after be-
ing switched off.
Do not touch any moving parts of the
machine.
Wait until the machine parts have come to a
complete stop.
b)
Danger from objects being flung out
When the machine is running, there is a risk of
injury as objects may be flung out uncontrol-
lably.
Before start-up, move guards into protective
position.
c)
Danger from objects being flung out
When the machine is running, there is a risk of
injury as objects may be flung out uncontrol-
lably.
When the machine is running, keep your
distance.
3. Order no. 939 106 3 (1x)
Danger to life when exceeding the max-
imum permitted PTO speed.
When exceeding the permitted PTO speed,
machine parts may be destroyed or be hurled
up uncontrollably.
As a result, people may be seriously or fatally
injured.
Observe the permitted PTO speed.
4. Order no. 9391014(1x)
To Next Page
Loading...
