Safety
16
Pos: 10.1 /Überschri ften/Überschri ften 2/F-J/GGrundlegende Si cherheitshin weise @ 186\mod_1380009482 364_78.docx @ 1606585 @ 2 @ 1
3.4 Basic safety instructions
Pos: 10.2 /BA/Sic herheit/1. Grundlegende Si cherheitshinweise/ Nichtbeachtung der SiHi und WaHi (Einführ text Grundlegende SiHi) _fuer alle @ 175\mod_1372 834139379_78.docx @ 150 4793 @ @ 1
Non-compliance with the safety instructions and warnings
Non-compliance with the safety instructions and warnings may result in injuries and damage to
the environment and property.
Pos: 10.3 /Überschri ften/Überschri ften 3/A-E/B/Bedeutung der Betriebsanleitung @ 186\mod_13800113915 83_78.docx @ 1606670 @ 3 @ 1
3.4.1 Importance of the operating instructions
Pos: 10.4 /BA/Sic herheit/1. Grundlegende Si cherheitshinweiseB edeutung der Betriebs anleitung_fuer alle @ 451\mod_1462796255723 _78.docx @ 3064819 @ @ 1
The operating instructions are an important document and a part of the machine. They are
aimed at the user and contain safety-relevant information.
Only the procedures indicated in the operating instructions are reliable. If the operating
instructions are not observed, people may be seriously injured or killed.
• Before using the machine for the first time, read and follow all the “Basic Safety Instructions”
in the Safety chapter.
• Before working, also read and observe the respective sections in the operating instructions.
• Keep the operating instructions ready to hand for the user of the machine.
• Hand over the operating instructions to subsequent users.
Pos: 10.5 /Überschri ften/Überschri ften 3/P-T/P/Personalq ualifikation des Bedi enpersonals @ 510\mod _1501758695126_78.doc x @ 3498448 @ 3 @ 1
3.4.2 Personnel qualification of the operating personnel
Pos: 10.6 /BA/Sic herheit/1. Grundlegende Si cherheitshinweise/ Personalqualif ikation_BA_fuer al le @ 176\mod_137284061148 4_78.docx @ 1505639 @ @ 1
If the machine is not used properly, people may be seriously injured or killed. To avoid
accidents, each person who works with the machine must satisfy the following minimum
requirements:
– He is physically capable of controlling the machine.
– He can work safely with the machine in accordance with these operating instructions.
– He understands the method of operation of the machine within the scope of his work and
can identify and avoid the dangers associated with the work.
– He has read the operating instructions and can implement the information in the operating
instructions accordingly.
– He is familiar with driving vehicles safely.
– For road travel he has adequate knowledge of the highway code and has the stipulated
driving licence.
Pos: 10.7 /Überschri ften/Überschri ften 3/P-T/P/Personalq ualifikation des Fac hpersonals @ 510\mod_15 01758760055_78.doc x @ 3498479 @ 3 @ 1
3.4.3 Personnel qualification of the technicians
Pos: 10.8 /BA/Sic herheit/1. Grundlegende Si cherheitshinweise/ Personalqualif ikation des Fachpersona ls_text @ 481\mod_147 5574402915_78.doc x @ 3241095 @ @ 1
If the work (assembly, conversion, modification, extension, repairs, retrofitting) is performed
improperly on the machine, people may be seriously or fatally injured. To avoid accidents,
everyone who performs work according to these instructions must meet the following minimum
requirements:
• Qualified professional, with relevant training.
• Capable of assembling the (partially) disassembled machine according to the assembly
instructions provided by the manufacturer.
• Capable of extending, modifying or repairing the function of the machine according to the
relevant instructions provided by the manufacturer.
• Ability to perform the work safely according to these instructions.
• Understands the mode of operation of the work to be performed and the machine and is
able to identify and avoid the hazards associated with the work.
• Has read these instructions and is able to apply the information in these instructions
accordingly.
Pos: 10.9 /Layout Mo dule /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1
To Next Page
Loading...
