Krone Fortima F 1250 MC - Shear Screw for Pick-up Drive

Operation
204
Pos: 49.33 /Übersc hriften/Überschri ften 3/P-T/S/Schersc hraube für Pick-up- Antrieb @ 333\mod_1429095756 578_78.docx @ 2544727 @ 3 @ 1
16.7.2 Shear Screw for Pick-up Drive
Pos: 49.34 /BA/Bedienun g /Rundballenpresse/ Scherschraube @ 35\ mod_1256128089316_78. docx @ 326536 @ @ 1
KR201141
1
2
3
4
KR201201
Fig. 149
To protect against overload the pick-up drive and the feed auger drive, which is located behind
the guard (3), are secured with a shear screw at the upper chain wheel.
• If a malfunction occurs, dismantle the fastening nuts (1). Remove the protective cover (3).
• Check condition of shear screw (4) and replace if necessary.
Note
There are 3 spare screws (2) on the inside of the protective cover (3) M10 x 35 single-action
24017, DIN 933 8.8 (Order No. 900 638).
• Attach protective cover (3).
Pos: 49.35 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1