Safety
51
Pos: 21.14 /Übersc hriften/Überschri ften 3/A-E/A/Abstel lstütze @ 109\mod_13353559 63452_78.docx @ 976541 @ 3 @ 1
3.7.3 Parking Support
Pos: 21.15 /BA/Fahren und Transport/Rundba llenpresse/Abstel lstützeAbstellstü tze_Allgemeiner Text_Ultima, Comprima, Fortima @ 409\mod_145034 4076356_78.doc x @ 2894732 @ @ 1
The parking support provides stability of the machine when it is not attached to the tractor. Use
it whenever the machine is parked.
Pos: 21.16 /BA/Inbetr iebnahme/Rundballe npresse/Abstell stützeBild Abstells tütze bewegen_Forti ma @ 307\mod_1416475236749 _78.docx @ 2386115 @ @ 1
FOR00072
3
1
5
2
7
6
4
Fig. 11
Pos: 21.17 /BA/Inbetr iebnahme/Rundballe npresse/Abstell stützeHinweis Abste llstütze bewegen @ 32\ mod_1253539702220_78. docx @ 314734 @ @ 1
Note
Risk of hands and feet when the parking support is actuated!
Pos: 21.18 /Übersc hriften/Zwischenüber schriften/A-E/ Abstellstütze in Transpor tstellung bringen @ 363\mod_14398977860 50_78.docx @ 2672925 @ @ 1
Moving parking support into transport position
Pos: 21.19 /BA/Inbetr iebnahme/Rundballe npresse/Abstell stützeAbstellstü tze hochdrehen Forti ma_Text @ 307\mod_141647663 4609_78.docx @ 2386620 @ @ 1
• As soon as the machine is connected to the tractor, turn the crank (1) several revolutions
clockwise until the support jack (5) has been relieved.
• Pull out locking bolt (3) on the lower part of the parking support (2).
• Push in support tube (4) until the strut (6) is in the notch (7).
• Secure in position with the locking bolt (3).
• Then raise the parking support (2) all the way.
Pos: 21.20 /Übersc hriften/Zwischenüber schriften/A-E/ Abstellstütze in Stützs tellung bringen @ 363\m od_1439898162667_78.d ocx @ 2672986 @ @ 1
Moving parking support into support position
Pos: 21.21 /BA/Inbetr iebnahme/Rundballe npresse/Abstell stützeAbstellstü tze herunterdrehen For tima_Text @ 307\mod_14164 77042286_78.doc x @ 2386711 @ @ 1
• Turn the crank (1) on the parking support several revolutions anticlockwise.
• Remove locking bolt (3) and pull support tube (4) out of the parking support (2).
• Secure with locking bolt (3) again.
• Crank the support jack (5) firmly onto the ground until the drawbar has been relieved.
Pos: 21.22 /BA/Er stinbetriebnahme/Großpac kenpressen/Abs tellstütze/Abste llstütze Standfläc he vergrößern @ 302\mod_1413 968281921_78.doc x @ 2353503 @ @ 1
Note
In order to increase the base of the support jack when the ground is soft, use a suitable
support.
Pos: 21.23 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1
To Next Page
Loading...
