Krone Fortima F 1250 MC - Activating TIM Functions; Reactivating TIM Functions; Deactivating TIM Functions

Operation
231
Pos: 49.56.15 /Übersc hriften/Überschr iften 3/P-T/T/TIM-Fu nktionen aktivieren @ 361\ mod_1439456958435 _78.docx @ 2668314 @ 3 @ 1
16.16.4 Activating TIM functions
Pos: 49.56.16 /Beipac ks/Rundballenpress en/TIM/Bedienun g/TIM-Anzeigen im Hauptf enster_Bild @ 282\ mod_1406643403124_78. docx @ 2174677 @ @ 1
1
2
Fig. 175
Pos: 49.56.17 /Beipac ks/Rundballenpress en/TIM/Bedienung/ TIM-Funktionen akti vieren_Comprima F V_ Text @ 388\mod_1445352231 423_78.docx @ 2778990 @ @ 1
• Start TIM functions on machine by pressing the key .
The key’s state changes to
and the TIM displays (1) and (2) are shown flashing in the main
window.
• Confirm TIM functions for tractor (see operating instructions of tractor).
The key’s state changes to
and the TIM displays (1) and (2) are shown flashing in the main
window. TIM functions are active.
Pos: 49.56.18 /Übersc hriften/Überschr iften 3/P-T/T/TIM-Fu nktionen reaktivier en @ 361\mod_1439456961 624_78.docx @ 2668376 @ 3 @ 1
16.16.5 Reactivating TIM functions
Pos: 49.56.19 /Beipac ks/Rundballenpress en/TIM/Bedienung/ TIM-Funktionen reak tivieren_Compri ma F V_Text @ 388\mod_14453523777 73_78.docx @ 2779051 @ @ 1
If a TIM function is oversteered, you will hear a quick interval sound for six times. The TIM
functions can be reactivated as long as
is displayed and the TIM functions (1) and (2) are
flashing:
• Confirm TIM functions for tractor (see operating instructions of tractor).
The key’s state changes to
and the TIM displays (1) and (2) are shown flashing in the main
window. The respective TIM function is active.
Pos: 49.56.20 /Übersc hriften/Überschr iften 3/P-T/T/TIM-Fu nktionen deakti vieren @ 361\mod_14394569594 94_78.docx @ 2668345 @ 3 @ 1
16.16.6 Deactivating TIM functions
Pos: 49.56.21 /Beipac ks/Rundballenpress en/TIM/Bedienun g/TIM-Funktionen dea ktivieren_Text @ 388\ mod_1445352395745_78. docx @ 2779082 @ @ 1
The automated process activated by the TIM functions will be deactivated if
– the key
on the ISOBUS terminal or the function key F6 is pressed.
– the working screen on the ISOBUS terminal is left.
– the ISOBUS Shortcut Button on the ISOBUS terminal is actuated.
– there is no activation on the tractor within 60 seconds after the machine has been activated.
– one of the TIM functions is oversteered by the driver.
– there are logic errors during the automated process, e. g. when the bale chamber is opened
although no tying process had been carried out.
Pos: 49.57 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1