Safety
19
Pos: 10.27 /BA/Sic herheit/1. Grundlegend e Sicherheitshinweis eBetriebssicher heit - Technische Grenz werte_RP_Schwader_W ender_BiG Pack_Transpor twagen @ 494\mod_14883 76088355_78.doc x @ 3322789 @ @ 1
Technical limit values
If the technical limit values of the machine are not observed, the machine may be damaged. As
a result, accidents may occur and people may be seriously injured or killed. Observance of the
following technical limit values is particularly important for safety:
– Maximum permitted operating pressure of the hydraulics
– Maximum permitted drive speed
– Maximum permitted axle load/axle loads
– Maximum permitted drawbar load
– Maximum permitted axle loads of the tractor
– Maximum permitted transport height and width
– Maximum permitted speed
• Observe limit values, see chapter "Technical data".
Pos: 10.28 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1
To Next Page
Loading...
