Krone Profi Liner - Page 92

SUPERSTRUCTURE OPERATION
92
Operating instructions • Semitrailer • 505369471-04 • 02/2019
Re-tightening the EasyTarp curtain ten-
sion cable with grid
1
2 3 4
Fig.6-52: Curtain tensioning device with grid
1 Tension cable
2 Screws
3 Curtain tensioning device
4 Grid
► Loosen both screws.
► Pull the curtain tensioning device for-
ward.
► Move the curtain tensioning device in
the grid pattern.
► Tighten up the screws.
ü The EasyTarp curtain is re-tightened.
Lowering the roof frame by 100mm
WARNING
Risk of crushing when closing the
EasyTarp hooks!
People can become injured when closing
the EasyTarp hooks.
► Maintain a distance of 1 m from the
trailer when closing the EasyTarp
hooks.
► Wear protective gloves.
1
2
Fig.6-53: Switch in “open” position
1 Front wall
2 Switch in “open” position
► Turn the switch to the "open" position.
ð The EasyTarp hooks are opened.
► Completely unhook the side curtain at
the front and the rear (curtain tension
cable and curtain).
1
Fig.6-54: Loosen the screw of the EasyTarp
curtain hook
1 Screw
► Loosen the screw of the EasyTarp
hook on the inside of the curtain at the
interface.