EasyManua.ls Logo

Kurzweil Forte SE - FXLFO, FXASR, and FXFUN Pages; INFO Page

Kurzweil Forte SE
374 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The Effects Chain Editor
FXLFO, FXASR, and FXFUN pages
8-3
Source
e Source parameter determines the Control source that will modulate the parameter
(Param) in real-time. is can be any of the normal channel Control sources (sliders, mod
wheel, pedals, etc.) or one of the Chain-specic Control sources (FXLFOs, FXASRs, and
FXFUNs).
Depth
e Depth parameter determines the range of modulation that the Controller will apply.
When the Control source has a value of 0, the parameters (Params) value will be the Adjust
value. When the control source is all the way up, the parameters (Params) value will be the
Adjust value plus the Depth value.
FXLFO, FXASR, and FXFUN pages
e FXLFO, FXASR, and FXFUN pages are the pages from which you edit the Eects-
only Control sources. ese are Control sources that can be used by the eects Mods in the
current Chain. e parameters on these pages work exactly like those of the corresponding
Control sources in program mode (see The LFO Page on page 7-44, The ASR Page on page
7-46, and The Function (FUN) Page on page 7-48.
INFO page
Press the INFO soft button to go to the Chain Info page where you can edit the controller
assignment info for the current Chain. Chain Info allows you to add a description for each
FX Mod you have assigned. On the Chain Info page, use the Channel/Layer/Zone buttons
to scroll through the current Chains list of controller assignment info. Each assignment Info
entry has a MIDI controller number and a Text parameter to describe what the assignment
controls. One Info entry can be made for each MIDI CC number.
Chain Info allows you to see a name for each FX Mod controller assignment, as well as set
an initial controller value for each FX Mod in each Program. When assigning a physical
controller or CC number to a source eld on one of the FX Mod pages, a Chain Info entry
is automatically added to the Chain Info Page with the name of the FX parameter. Chain
Info entries are also automatically deleted when their associated FX Mods are removed or
unassigned from the FX Mod pages.

Table of Contents

Other manuals for Kurzweil Forte SE

Related product manuals