Kurzweil Forte SE - TOOLS Page

Global Mode
TOOLS Page
12-26
Audio Input Mods in Multi Mode
To control Audio Input Mods in Multi Mode, rst make sure the Global “Control”
parameter is set to “Current Channel Control”. On the Multi Edit Multi CCs or Multi
Switches pages, use the Dest eld to assign a Multi controller to send the desired MODs
CC numbers (see CCTLS (CCs/Continuous Controllers) Page on page 11-13 and SWITCH
(Switches) Page on page 11-17 for details). e Zone used to send these CC numbers must
have a MIDI Channel which matches the current Multi’s AuxFXChan. See Channel on page
11-8 and Aux FX Chan on page 11-27 for details.
TOOLS Page
Pressing the TOOLS soft button calls up a page that gives you access to four analytic and
diagnostic tools.
Press the “EXIT” button when nished using a Tool.
MIDI MON
Press the MIDMON soft button to view MIDI messages sent from the Forte SE. is is
useful for making sure controls are assigned as you want them, checking note numbers and
velocities, and checking controller values or other MIDI messages. e most recently sent
message will be at the bottom of the list.