Program Edit Mode
Selecting Parameters
7-2
Selecting Parameters
The Display
In Program Edit Mode, the top line of the display shows the current Mode, Page, and Layer.
Soft button options for Program Edit mode
Current Page
Current Parameter
Alpha Wheel & Previous (–) and Next (+) Value Buttons
Use the Alpha Wheel or the Value buttons to the right of the display below the Alpha Wheel,
to change the selected parameter value. Turning the Alpha Wheel counter-clockwise or
pressing the Previous- button will select the previous value and turning the Alpha Wheel
clockwise or pressing the Next+ button will select the next value.
To Next Page
Loading...
