Kurzweil Forte SE - Changing the Transmit MIDI Channel; Panic

Program Mode
Panic
6-17
Changing the Transmit MIDI Channel
e current MIDI Transmit channel is shown on the right side of the top line of the display.
A dierent Program can be selected for each MIDI Channel. All channels can be triggered
simultaneously from an external MIDI sequencer or computer. e Aux FX Chains of the
Program on the currently selected MIDI Channel are used for Programs on all Channels.
Press the Channel/Layer/Zone (▲ or ▼) buttons to change the MIDI Transmit channel
Pressing both ▲ and ▼ at the same time will reset the current MIDI Transmit channel to 1.
Panic
Pressing the 15 and 16 Program/Multi buttons simultaneously deactivates all sounding
notes and resets controller values by sending an “All Notes O ” message and a “Reset All
Controllers” message on all 16 MIDI channels.