Kurzweil Forte SE - Song Mode: the METRONOME Page

Song Mode and the Song Editor
Song Mode: The METRONOME Page
13-12
The Rec, Play, and Stop Soft Buttons
These soft buttons function as described in “The Rec, Play, and Stop Soft Buttons” on page 13-12.
The Keep Soft Button
Pressing the Keep soft button captures the current settings for each track’s program, panning,
and volume as the initial settings. Remember to save if you want these change to be permanent!
The Done Soft Button
If no changes were made in the MIXER page, pressing the Done soft button calls up the MAIN
page. If changes were made, pressing the Done soft button calls up the “Save Changes” dialog.
Song Mode: The METRONOME Page
All of the parameters aecting the sequencer metronome are on the METRONOME page. Like
the other pages in the Song Editor, you can save changes made in this page.
Parameter Range of Values Default
Metronome Off, Rec, Always Rec
Count Off Off, 1, 2, 3, 4 (StartOnly, Always) 1 (StartOnly)
Program Program List 225 Full Room Kit
Channel 1 to 16 16
Strong Note 0 to 127 102
Strong Velocity 0 to 127 127
Soft Note 0 to 127 104
Soft Velocity 0 to 127 100
Metronome
This parameter determines the recording modes in which the metronome plays. With
Metronome set to O, the metronome never plays. With Metronome set to Rec, the metronome
only plays during recording. With Metronome set to Always, the metronome plays during
playback and recording. With Metronome set to CountO, the metronome plays only during
count o (if the CountO parameter is set to something other than O.)