Features of the Forte SE
Real Time Controls
3-6
Arp On/Off Button
e Arp On/O button is set by default to turn on and o the Forte SE’s Arpeggiator. It can
also be assigned to control other parameters in Multi Edit mode.
Transpose Buttons
e Transpose buttons are located on the left side of the front panel, just above the Pitch &
Modulation Wheels. ey can be used to change the tuning of notes played on the Forte SE
keyboard in semitones (ST), also known as half steps. is is a convenient way to change
the key of a song without learning to play it in a dierent key. e Transpose buttons also
transpose MIDI notes sent to the USB and MIDI out ports.
Press the Transpose - or + buttons to transpose the Forte SE keyboard down or up by one
semitone. e top line of the display shows the current transposition value. Pressing both
Transpose - and + simultaneously will reset the transposition to 0. To transpose up and down
by octave intervals (12 ST), press the Octav- and Octav+ soft buttons underneath the display.
e maximum transposition value possible is +/–36 semitones.
e LEDs of the Transpose buttons indicate whether the current Program is transposed up
(Transpose + LED is lit) or transposed down (Transpose – LED is lit). When there is no
transposition, neither Transpose button is lit.
To Next Page
Loading...
