Program Mode
Save User Programs
6-14
The Arp Pages
Selecting the Arp soft button will call up the Arpeggiator settings on the ARP1page, and put
you into Program Edit Mode. See The Arpeggiator Function on page 7-56 for details on
using the Arpeggiator function.
Save User Programs
If you make changes to the current Program using any of the controllers, the Save button’s
LED lights to indicate that a change has been made to that Program.
To save a copy of the Program with the changes you’ve made, press the Save button once to
view the Save Dialog. e Save Dialog allows you to choose an ID number to that will be
associated with the program you are saving. When viewing the Save Dialog, you can quickly
save the Program to the displayed ID number by pressing the Save button again.
Changing ID Numbers
e display shows the rst available ID number and the current Program name. You can
save Programs with ID numbers from 1025 to 2048. If you are saving a Program that has
not been previously edited, the next available unused ID number will be selected. If you are
saving a previously edited User Program, the ID number that the Program was last saved
with will be selected. Press the Value Jump double button press (Previous-/Next+) to toggle
between selecting the ID number that the Program was last saved with and the next available
unused ID number.
To Next Page
Loading...
