Kurzweil Forte SE - Run Diagnostics

System Mode
Run Diagnostics
14-7
Run Diagnostics
You will most likely not need to use the Run Diagnostics operations in normal cases.
ese operations are mostly used at the factory and service centers by technicians for
troubleshooting hardware problems. But, in some cases you might be required to run these
diagnostics for troubleshooting and diagnosing symptoms. In these cases, following the
direction of Kurzweil Technical Support.
FORTE SE System Mode v.3.44.25701
Run
Forte
System
Update
Run
Diags
System
Reset
System
Utilities