Kurzweil Forte SE - Selecting Multis

Multi Mode
Selecting Multis
10-2
Selecting Multis
e Forte SE features eight Multi Banks (Factory Banks A-D and User Banks A-D). Each
Forte SE Bank has space for 256 Multis, for a total of 2048 possible Multis. Each Bank is
split into 16 groups of 16 Multis each, selectable by using the Category buttons. Because
each Multi can contain multiple instrument sounds, Multis are not organized by instrument
category. If your Forte SE does not include Factory Banks B-D, visit kurzweil.com to
download new factory Banks for free, when available.
When you are in Multi Mode, there a few ways to select Multis.
• To select any Multi in the current Category, press a Program/Multi button.
• To select a Multi in a dierent Category, press the Category button of choice and
then the Program/Multi button to select from the 16 Multis in the Category.
• To select the Category Default Multi, simply press a Category button.
• To switch between the Factory and User Multis, press the User button, followed by a
Category button and then a Program/Multi button.
• e Alpha Wheel and the Previous-/Next+ buttons allow you to advance through the
Multis one at a time. When you reach the end of the Category, advancing further will
go to the next Category.
• If a Multi is assigned to a Favorite button, pressing that button will go directly to the
assigned Multi.
• To select a Multi in a dierent Forte SE Bank, press the Multi mode button while
in Multi Mode to view the Select Bank page. On the Select Bank page use the
navigation buttons to select a Bank and press the OK soft button, then use any of the
methods above to select a Multi in that Bank.
• When the Global Mode User Type parameter is set to Advanced, and the Global
Mode Sound Sel parameter is set to ID number, Multis can be selected by typing in
an ID number using the numbers printed on the Program/Multi buttons, followed by
pressing the Enter button.
See Appendix E for a full list of factory Multis.