Kurzweil Forte SE - Master EQ

Features of the Forte SE
Master EQ
3-8
Pedal assignments can be changed in each Program and saved in a User Program. Each Zone
in a factory Multi may have dierent pedal assignments, and pedals are all independently
assignable within each Zone of a user Multi. You can also use Global Mode to set pedal
overrides, which will change the assignment of each pedal for all Programs in Program Mode,
and act as default pedal assignments for all Multis in Multi Mode.
Master EQ
e Master EQ allows you to have real-time control over the frequency
response of all audio generated in either Program or Multi Modes. When
the Master EQ On/O button is “On”, the rotary knobs can change the
high, middle & low frequencies of the audio.
If the LED on the Master EQ On/O button is lit, this indicates that the
Master EQ section is now “on.”
e HI & LOW EQ’s are shelving type lters, and the MID has an
adjustable center frequency with a range of approximately 2 octaves up
and down centered around approximately 1.4 kHz
Frequency Gain (+/-)
HI
~6.6 kHz 15 dB
MID*
~1.4 kHz 15 dB
LOW
123 Hz 15 dB
* center of range
When the Master EQ is on, the audio signal ows as per the diagram above. When it is o,
the signal ows as per the diagram below.