Kurzweil Forte SE - Mode Buttons

Features of the Forte SE
Mode Buttons
3-9
Volume Slider
is controls the audio output level to external speakers and headphones.
Mode Buttons
e Mode buttons are located on the right side of the Forte SE front panel. With these
buttons you can instantly access the Program, Multi or Global Modes. If you are viewing an
edit mode, you will have to press the Exit button before changing modes. On the Program
and Multi mode main pages, press the currently selected mode button again to view the
Banks page for the currently selected mode.
Program Button
Pressing the Program button enters Program Mode (described in further detail in Ch. 6
Program Mode). In Program Mode, you can select and play dierent sounds (or “Programs”).
is button’s LED is illuminated when you are in Program Mode. Program Mode is the
default Mode — the Forte SE always boots up in this Mode. In Program mode, press the
Program button again to view the Banks page (see page 6-2 for details).
Multi Button
Pressing the Multi button enters Multi Mode (described in further detail, in Ch. 10 Multi
Mode). In Multi Mode, you can select dierent congurations of Programs, controller
assignments, and MIDI channel assignments. is button’s LED is illuminated when you
are in Multi Mode. In Multi mode, press the Multi button again to view the Banks page (see
page 10-2 for details).