Global Mode
MAIN Page
12-2
Selecting and Editing Parameters
Use the soft buttons underneath the display to select the page you need. To scroll through
the parameters of Global Mode, use the Navigation buttons.
To edit the currently selected parameter, use the Alpha Wheel or the Previous- and Next+
buttons. Some parameters can be reset to a default value by pressing the Previous-/Next+
buttons simultaneously (Value Jump).
MAIN Page
e MAIN page in Global Mode allows you to adjust global tuning and other basic settings.
Be sure to read about the User Type parameter, which enables additional features in all modes
when set to Advanced.
Parameter Range of Values Default Value
Tune -100 to 100 Cents (Ct) 0ct
Transpose -128 to 127 Semitones (ST) 0ST
User Type Regular, Advanced Regular
FX Mode Performance, Multitrack Performance
Auto Power Off
On, Off
On
Power Off Time 15 & 30 mins, 1 hr, 2 hr, 4 hr, 8hr 8 hours
Out Clock Off, On Off
ClockSrce Internal, External Internal
ProgTempo Program, System Program
Sound Sel Category, ID number, EnterBttn Category
S.Buttons Octave, Arp, Rec/Play Octave
Tune
e Tuning parameter allows you to ne-tune the unit in cents—one cent is one hundredth
of a semitone (100 cents comprise a semitone). You can select any tuning from -100 cents to
100 cents. By default this parameter is set to 0.
To Next Page
Loading...
