Kurzweil Forte SE - System Reset

System Mode
System Reset
14-8
System Reset
CAUTION: THIS OPERATION ERASES ALL USER OBJECTS
(PROGRAMS/MULTIS ETC.).
System Reset will restore the Forte SE back to a Factory State. In addition to all user objects
(Programs/Multis etc.) being deleted, Global Mode settings will be restored to factory
defaults.
Caution: Before Updating, back up your user objects (Programs/
Multis etc.) by storing them to an external device in Global Mode. See
instructions in STORE on page 12-12.
To clear all user objects (Programs/Multis etc.) and restore the factory default state, select the
System Reset menu option.
FORTE SE System Mode v.3.44.25695
Run
Forte
System
Update
Run
Diags
System
Reset
System
Utilities
e Forte SE will now ask the question “is will delete all user objects. Are you sure?”
If you are not sure what you are about to do, select CANCEL. is will exit the System Reset
process and take you back to the System Mode menu.
If you select OK you are now erasing all the user objects (Programs/Multis etc.) in the Forte
SE and restoring the instrument back to a Factory State.